Iphaneli ye-3D FRP ene-resin
Indwangu elukiwe ye-3-D Fiberglass ingahlanganiswa nama-resin ahlukene (i-polyester, i-Epoxy, i-Phenolic njll.), bese umkhiqizo wokugcina uyiphaneli ye-3D composite.
Inzuzo
1. isisindo esincane bur amandla aphezulu
2. Ukumelana okukhulu nokususwa kwe-delamination
3. Umklamo ophezulu - ukuguquguquka
4. Isikhala phakathi kwezingqimba zombili zedekhi singaba nemisebenzi eminingi (Sifakwe izinzwa nezintambo noma sifakwe igwebu)
5. Inqubo elula nephumelelayo yokubopha i-lamination
6. Ukushisa nokushisa umsindo, Okungashisi, Okungadluliswa ngamagagasi
Isicelo
Imininingwane
| Ukuphakama Kwensika | mm | 4.0 | 6.0 | 8.0 | 10.0 | 12.0 | 15.0 | 20.0 | |
| Ubuningi be-Warp | impande/10cm | 80 | 80 | 80 | 80 | 80 | 80 | 80 | |
| Ubuningi be-Weft | impande/10cm | 96 | 96 | 96 | 96 | 96 | 96 | 96 | |
| Ubuningi Bobuso | Izindwangu ze-spacer ezingu-3-D | kg/m2 | 0.96 | 1.01 | 1.12 | 1.24 | 1.37 | 1.52 | 1.72 |
| Izindwangu ze-spacer ze-3-D kanye nokwakhiwa kwesandwich | kg/m2 | 1.88 | 2.05 | 2.18 | 2.45 | 2.64 | 2.85 | 3.16 | |
| Amandla Okuqina Aqondile | I-MPa | 7.5 | 7.0 | 5.1 | 4.0 | 3.2 | 2.1 | 0.9 | |
| Amandla Okucindezela Aqondile | I-MPa | 8.2 | 7.3 | 3.8 | 3.3 | 2.5 | 2.0 | 1.2 | |
| Imoduli yokucindezela eqondile | I-MPa | 27.4 | 41.1 | 32.5 | 43.4 | 35.1 | 30.1 | 26.3 | |
| Amandla Okugunda | I-Warp | I-MPa | 2.9 | 2.5 | 1.3 | 0.9 | 0.8 | 0.6 | 0.3 |
| I-Weft | I-MPa | 6.0 | 4.1 | 2.3 | 1.5 | 1.3 | 1.1 | 0.9 | |
| I-modulus yokugunda | I-Warp | I-MPa | 7.2 | 6.9 | 5.4 | 4.3 | 2.6 | 2.1 | 1.8 |
| I-Weft | I-MPa | 9.0 | 8.7 | 8.5 | 7.8 | 4.7 | 4.2 | 3.1 | |
| Ukuqina Kokugoba | I-Warp | N.m2 | 1.1 | 1.9 | 3.3 | 9.5 | 13.5 | 21.3 | 32.0 |
| I-Weft | N.m2 | 2.8 | 4.9 | 8.1 | 14.2 | 18.2 | 26.1 | 55.8 | |
Qaphela: Inkomba yokusebenza engenhla yenzelwe ulwazi kuphela, ngokusekelwe ezidingweni zokusebenza zomsebenzisi, isakhiwo sokuqinisa indwangu ye-3D spacer singaklanywa.
Bhala umlayezo wakho lapha bese uwuthumela kithi
